Home › Engine / Hybrid System › 2NR-VE COOLING › COOLING FAN MOTOR › from 2015.08
RM19Y0E _51 Engine / Hybrid System _042282 2NR-VE COOLING _0196240 COOLING FAN MOTOR A

2NR-VE COOLING  COOLING FAN MOTOR  INSTALLATION  


PROCEDURE

Hide 16363 1.INSTALL COOLING FAN MOTOR

a.

Install the cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16361 2.INSTALL FAN

a.

Install the fan with the nut.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 16360A 3.INSTALL FAN WITH MOTOR ASSEMBLY

a.

Install the fan with motor assembly with the 4 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


b.

Connect the cooling fan motor connector and the wire harness clamp.


Hide 16571C 4.INSTALL NO. 1 RADIATOR HOSE

Hide 17750A 5.INSTALL AIR CLEANER INLET ASSEMBLY

Hide 7.INSPECT FOR COOLANT LEAK

Hide 51441 8.INSTALL NO. 1 ENGINE UNDER COVER