Home › Drivetrain › CLUTCH › CLUTCH RELEASE CABLE(for 1NR-VE) › from 2015.08
RM19Y0E _52 Drivetrain _002984 CLUTCH _0197230 CLUTCH RELEASE CABLE(for 1NR-VE) A

CLUTCH  CLUTCH RELEASE CABLE(for 1NR-VE)  INSTALLATION  


PROCEDURE

Hide 31340 1.INSPECT CLUTCH RELEASE CABLE ASSEMBLY

C151134

a.

Ensure that the inner cable slides smoothly.


b.

Inspect the clutch release cable assembly and ensure that there is no wear, damage, deformation, cracks, etc. on any part of the cable.


Hide 31340 2.INSTALL CLUTCH RELEASE CABLE ASSEMBLY

a.

Install the clutch release cable assembly with the 2 bolts.

Torque:
11.3 N*m (115 kgf*cm, 8 ft.*lbf)


b.
C150626C02
2.542,1.094 2.875,0.771 false 2.917,0.677 3.115,0.865 0.198,0.188 10 *1
*1 Clutch Release Fork Sub-Assembly


Install the clutch release cable assembly onto the clutch release fork sub-assembly.

HINT:

Apply 0.5g of MP grease to the clutch release cable assembly end and the sliding parts of the clutch release lever.



c.

Install the clutch housing cover onto the clutch housing.


d.

Push in the clutch release cable assembly through to the cabin.


e.

for LHD

i.

Install the clutch release cable assembly onto the 4 clutch cable brackets.



f.

for RHD

i.

Install the clutch release cable assembly and clutch cable bracket with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


ii.

Install the clutch release cable assembly onto the 3 clutch cable brackets.



g.

Install the clutch release cable bush and the plate washer.


h.

Install the clutch release cable assembly through to the clutch pedal bracket.


i.
C246241

Apply MP grease to the clutch release cable assembly end and pedal hook.


j.

Connect the end of the clutch release cable assembly to the clutch pedal sub-assembly.


Hide 84520 3.INSTALL CLUTCH START SWITCH ASSEMBLY

Hide 51441 4.INSTALL NO. 1 ENGINE UNDER COVER

Hide 5.INSPECT AND ADJUST CLUTCH PEDAL