1.REMOVE ENGINE AND TRANSMISSION ASSEMBLY (for 1NR-VE)
2.REMOVE ENGINE AND TRANSMISSION ASSEMBLY (for 2NR-VE)
3.INSTALL ENGINE HANGER
4.DISCONNECT ENGINE WIRE
Disconnect the clamps and connectors from the manual transmission assembly.
28100
5.REMOVE STARTER ASSEMBLY (for 1NR-VE)
28100
6.REMOVE STARTER ASSEMBLY (for 2NR-VE)
33030
7.REMOVE MANUAL TRANSMISSION ASSEMBLY
Remove the 9 bolts and manual transmission assembly.
33823
8.REMOVE NO. 1 TRANSMISSION CONTROL CABLE BRACKET
Remove the 2 bolts and the No. 1 transmission control cable bracket.
12321D
9.REMOVE REAR ENGINE MOUNTING BRACKET
Remove the 3 bolts and separate the rear engine mounting bracket from the manual transmission assembly.
12371
10.REMOVE REAR NO. 1 ENGINE MOUNTING INSULATOR
Perform this procedure only when replacement of the rear No. 1 engine mounting insulator is necessary.
Remove the bolt.
Remove the 2 bolts and rear No. 1 engine mounting insulator.