Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › BATTERY BLOWER › 2016.10–2019.09
RM32K0E _51 Engine / Hybrid System _059620 HYBRID / BATTERY CONTROL _0292503 BATTERY BLOWER A

HYBRID / BATTERY CONTROL  BATTERY BLOWER  INSTALLATION  


PROCEDURE

Hide G9230 1.INSTALL BATTERY COOLING BLOWER ASSEMBLY

a.

Engage the 2 claws.


b.

install the 3 bolts to install the battery cooling blower assembly.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)

NOTICE:
·

Be sure not to touch the fan part of the battery cooling blower assembly.

·

Do not lift the battery cooling blower assembly using the wire harness.




c.

Engage the 2 clamps.


d.

Connect the battery cooling blower assembly connector.


Hide 71033 2.INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY

Hide 76974F 4.INSTALL REAR UNDER SIDE COVER LH

Hide 67918A 5.INSTALL REAR DOOR SCUFF PLATE LH

Hide 76973F 6.INSTALL REAR UNDER SIDE COVER RH

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION


Hide 67917A 7.INSTALL REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION


Hide 72693 8.INSTALL REAR SEAT CUSHION LOCK HOOK

Hide 9.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY