Home › Engine / Hybrid System › 2ZR-FXE (COOLING) › THERMOSTAT › 2016.10–2020.08
RM32K0E _51 Engine / Hybrid System _060780 2ZR-FXE COOLING _0298027 THERMOSTAT A

2ZR-FXE COOLING  THERMOSTAT  REMOVAL  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 2.DRAIN ENGINE COOLANT (for Engine)

Hide 53141F 3.REMOVE RADIATOR COVER

Hide 17752 4.REMOVE NO. 2 AIR CLEANER INLET

Hide 17705 5.REMOVE AIR CLEANER CAP SUB-ASSEMBLY

Hide 17801 6.REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

Hide 17701 7.REMOVE AIR CLEANER CASE SUB-ASSEMBLY

Hide 17751 9.REMOVE NO. 1 AIR CLEANER INLET

Hide 15301 10.REMOVE ENGINE OIL LEVEL DIPSTICK

a.

Remove the engine oil level dipstick from the engine oil level dipstick guide.


Hide 11452 11.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

a.
A375607

Disengage the clamp to disconnect the engine wire from the engine oil level dipstick guide.


b.

Remove the bolt and engine oil level dipstick guide from the cylinder block sub-assembly and oil pan sub-assembly.


c.

Remove the engine oil level dipstick guide O-ring from the engine oil level dipstick guide.


Hide 16031 12.REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

a.
A375608C01
1,1.781 1,1.646 1,1.646 1.396,1.448 false 2.396,1.177 2.198,1.177 2.198,1.177 1.969,0.969 false 0.906,1.833 1.219,1.99 0.313,0.156 10 true *1 2.458,1.094 2.698,1.313 0.24,0.219 10 true *2
*1 No. 2 Radiator Hose
*2 No. 3 Water By-pass Hose


Slide the 2 clips and disconnect the No. 2 radiator hose and No. 3 water by-pass hose from the water inlet with thermostat sub-assembly.

NOTICE:
·

Do not apply force to the water inlet with thermostat sub-assembly when disconnecting the No. 3 water by-pass hose.

·

Do not damage the water inlet with thermostat sub-assembly.



HINT:

When disconnecting the No. 3 water by-pass hose, slide the clip, rotate the hose and pull it straight off the pipe.



b.

Type A:

i.
A375609

Remove the 2 nuts, bolt and water inlet with thermostat sub-assembly.


ii.
A216666

Remove the gasket from the water inlet with thermostat sub-assembly.



c.

Type B:

i.
A375610

Remove the 3 bolts and water inlet with thermostat sub-assembly.


ii.
A216666

Remove the gasket from the water inlet with thermostat sub-assembly.