Use the same procedure as for the LH and RH sides.
The procedure described below is for the LH side.
84233
1.INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
|
Install in this Direction |
Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the screw.
Connect the connector.
62414A
2.INSTALL CENTER PILLAR LOWER GARNISH
62332A
3.CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP
Connect the rear door opening trim weatherstrip to the area shown in the illustration.
62312B
4.CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP
Connect the front door opening trim weatherstrip to the area shown in the illustration.
73220
5.CONNECT FRONT SEAT OUTER BELT ASSEMBLY
73233
6.INSTALL LAP BELT OUTER ANCHOR COVER
67918A
7.INSTALL REAR DOOR SCUFF PLATE
67914
8.INSTALL FRONT DOOR SCUFF PLATE
72693
9.INSTALL REAR SEAT CUSHION LOCK HOOK
10.INSTALL REAR SEAT CUSHION ASSEMBLY