Home › Engine / Hybrid System › STOP AND START › ENGINE STOP AND START ECU › 2016.10–2019.09
RM32H0E _51 Engine / Hybrid System _059427 STOP AND START _0290844 ENGINE STOP AND START ECU A

STOP AND START  ENGINE STOP AND START ECU  INSTALLATION  


PROCEDURE

Hide 89261A 1.INSTALL ENGINE STOP AND START ECU (for LHD)

a.
A387505

Engage the 2 claws and install the engine stop and start ECU to the ECU integration box RH.


Hide 89261A 2.INSTALL ENGINE STOP AND START ECU (for RHD)

a.
A387507

Engage the 2 claws and install the engine stop and start ECU to the ECU integration box LH.


Hide 82877 3.INSTALL ECU INTEGRATION BOX RH (for LHD)

Hide 82878 4.INSTALL ECU INTEGRATION BOX LH (for RHD)

Hide 5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Click hereGeneral>MAINTENANCE>8NR-FTS BATTERY>INSTALLATION

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION