Home › Engine / Hybrid System › 3ZR-FAE (ENGINE CONTROL) › ENGINE OIL TEMPERATURE SENSOR
RM32H0E _51 Engine / Hybrid System _059607 3ZR-FAE ENGINE CONTROL _0293879 ENGINE OIL TEMPERATURE SENSOR A

3ZR-FAE ENGINE CONTROL  ENGINE OIL TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89429F 1.INSTALL ENGINE OIL TEMPERATURE SENSOR

a.

Install a new gasket to the engine oil temperature sensor.


b.
A393541E01
2.021,0.448 2.292,0.208 true 2.313,0.115 2.656,0.302 0.344,0.188 10 true SST

Using SST, install the engine oil temperature sensor to the timing chain cover sub-assembly.

SST
09817-33191  

Torque:
19.6 N*m (200 kgf*cm, 14 ft.*lbf)

NOTICE:

If the engine oil temperature sensor has been struck or dropped, replace it.



c.

Connect the engine oil temperature sensor connector.


Hide 51443C 4.INSTALL REAR ENGINE UNDER COVER RH

Hide 5.INSTALL FRONT WHEEL RH