Home › Engine / Hybrid System › 8NR-FTS (COOLING) › THERMOSTAT
RM32H0E _51 Engine / Hybrid System _060195 8NR-FTS COOLING _0295083 THERMOSTAT A

8NR-FTS COOLING  THERMOSTAT  INSTALLATION  


PROCEDURE

Hide 16326 1.INSTALL NO. 2 WATER INLET HOUSING GASKET

a.

Install a new No. 2 water inlet housing gasket to the water inlet with thermostat sub-assembly.


Hide 16031 2.INSTALL WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

a.

Install the water inlet with thermostat sub-assembly with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 16267 3.CONNECT NO. 3 WATER BY-PASS HOSE (for CVT)

a.

Connect the No. 3 water by-pass hose to the water inlet with thermostat sub-assembly and slide the clip to secure it.


Hide 16267C 4.CONNECT NO. 4 WATER BY-PASS HOSE (for Manual Transaxle)

a.

Connect the No. 4 water by-pass hose to the water inlet with thermostat sub-assembly and slide the clip to secure it.


Hide 16572D 5.CONNECT NO. 2 RADIATOR HOSE

Hide 51441 9.INSTALL NO. 1 ENGINE UNDER COVER