Home › Power Source / Network › 8NR-FTS (BATTERY / CHARGING) › GENERATOR (for VALEO Made) › 2016.10–2020.08
RM32H0E _57 Power Source / Network _060209 8NR-FTS BATTERY / CHARGING _0295244 GENERATOR(for VALEO Made) A

8NR-FTS BATTERY / CHARGING  GENERATOR(for VALEO Made)  INSTALLATION  


PROCEDURE

Hide 27020 1.INSTALL GENERATOR ASSEMBLY

a.

Install the generator assembly with the bolt and 2 nuts.

Torque:
25 N*m (255 kgf*cm, 18 ft.*lbf)


b.

Connect the generator assembly connector.


c.

Connect the engine wire to the terminal B with the nut.

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)


d.

Install the terminal cap.


Hide 3.INSTALL FAN AND GENERATOR V BELT

Hide 4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Click hereGeneral>MAINTENANCE>8NR-FTS BATTERY>INSTALLATION

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION