27020
1.INSTALL GENERATOR ASSEMBLY
Install the wire harness clamp bracket to the generator assembly with the bolt.
Install the generator assembly with the bolt and 2 nuts.
Engage the wire harness clamp.
Connect the generator assembly connector.
Connect the engine wire to the terminal B with the nut.
Install the terminal cap.
2.INSTALL INTERCOOLER ASSEMBLY
3.INSTALL FAN AND GENERATOR V BELT
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Click hereGeneral>MAINTENANCE>8NR-FTS BATTERY>INSTALLATION
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION