Home › Engine / Hybrid System › 3ZR-FAE (COOLING) › WATER PUMP
RM32H0E _51 Engine / Hybrid System _060196 3ZR-FAE COOLING _0295092 WATER PUMP A

3ZR-FAE COOLING  WATER PUMP  INSTALLATION  


PROCEDURE

Hide 16100 1.INSTALL ENGINE WATER PUMP ASSEMBLY

a.
A395336C01
0.844,1.354 1.208,1.135 true 0.583,1.271 0.802,1.469 0.219,0.198 10 true *a
*a Protrusion


Align the protrusion of a new gasket with the cutout in the timing chain cover sub-assembly and install the gasket in the groove of the timing chain cover sub-assembly.

HINT:

Be sure to clean the contact surfaces.



b.
A395335N01
0.865,0.156 1.083,0.365 0.219,0.208 10 true *A 0.427,1.167 0.646,1.375 0.219,0.208 10 true *A 0.708,1.781 0.927,1.99 0.219,0.208 10 true *A 1.958,1.948 2.177,2.156 0.219,0.208 10 true *B 2.646,1.375 2.865,1.583 0.219,0.208 10 true *B 2.156,0.177 2.375,0.385 0.219,0.208 10 true *B

Install the engine water pump assembly with the 6 bolts.

Torque:
Bolt (A) : 25.5 N*m (260 kgf*cm, 19 ft.*lbf)
Bolt (B) : 21 N*m (214 kgf*cm, 15 ft.*lbf)

Bolt Length:
Item Length
Bolt (A) 35 mm (1.38 in.)
Bolt (B) 25 mm (0.984 in.)



Hide 16620 2.INSTALL V-RIBBED BELT TENSIONER ASSEMBLY

Hide 4.ADD ENGINE COOLANT

Hide 51441 6.INSTALL NO. 1 ENGINE UNDER COVER