27020
1.INSTALL GENERATOR ASSEMBLY
Install the wire harness clamp bracket to the generator assembly with the bolt.
Install the generator assembly with the 2 bolts.
Engage the clamp to connect the engine wire to the wire harness clamp bracket.
Connect the generator assembly connector.
Connect the engine wire to terminal B with the nut.
Install the terminal cap to the generator assembly.
2.INSTALL FAN AND GENERATOR V BELT
3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Click hereGeneral>MAINTENANCE>3ZR-FAE BATTERY>INSTALLATION
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION