85310
1.INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
|
Install in this Direction |
Install the washer motor and pump assembly as shown in the illustration.
Connect the connector.
Connect the washer hose.
2.ADD WASHER FLUID
Connect the rear washer hose.
Add washer fluid to the washer jar.
53875A
3.INSTALL FRONT FENDER LINER RH
Install the front fender liner RH with the 7 clips and 5 screws.
Install the pin hold clips as shown in the illustration.
Insert each pin hold clip with the slot aligned vertically. Do not rotate the pin hold clip after inserting it. After installation, confirm that the slot is aligned vertically.
75851
4.INSTALL ROCKER PANEL MOULDING RH
75601A
5.INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY RH
53851D
6.INSTALL FRONT WHEEL OPENING EXTENSION PAD RH
Install the front wheel opening extension pad RH with the 5 screws.
7.INSTALL FRONT WHEEL RH