Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › RADIATOR GRILLE › from 2020.08
RM32H0E _59 Vehicle Exterior _060783 EXTERIOR PANELS / TRIM _0298080 RADIATOR GRILLE A

EXTERIOR PANELS / TRIM  RADIATOR GRILLE  INSTALLATION  


PROCEDURE

Hide 53111 1.INSTALL RADIATOR GRILLE

a.

Engage the claws to install the radiator grille.


b.

Install the 2 bolts.


c.

w/o Panoramic View Monitor System:

i.

Engage the wire harness clamp.



d.

w/ Panoramic View Monitor System:

i.

Engage the wire harness clamps.



Hide 88211B 2.INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Toyota Safety Sense)

Hide 3.INSTALL FRONT BUMPER ASSEMBLY (w/o Toyota Safety Sense)

Hide 4.PERFORM CALIBRATION

·

Parking support brake system and Simple intelligent parking assist system:

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING SUPPORT BRAKE SYSTEM>CALIBRATION


Hide 5.ADJUST MILLIMETER WAVE RADAR SENSOR

a.

When the millimeter wave radar sensor assembly is replaced with a new one, adjustment of the radar sensor beam axis must be performed.

HINT:

Millimeter wave radar sensor assembly Learning can be performed by using either Triangle Target or Flat Surface Target or Driving Adjustment.