Home › Brake › PARKING BRAKE › ELECTRIC PARKING BRAKE SYSTEM › from 2021.09
RM32H0E _54 Brake _060043 PARKING BRAKE _0294919 ELECTRIC PARKING BRAKE SYSTEM C

PARKING BRAKE  ELECTRIC PARKING BRAKE SYSTEM  P0805  Clutch Position Sensor "A" Circuit  


DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
P0805 Clutch Position Sensor "A" Circuit Clutch stroke sensor signal from ECM cannot be received for 0.3 seconds or more
·

ECM

·

CAN communication system

·

Skid control ECU (brake actuator assembly)


DTC stored An electric parking brake system malfunction is displayed on the multi-information display.

CAUTION / NOTICE / HINT

NOTICE:

When replacing the skid control ECU (brake actuator assembly), operate the electric parking brake switch (electric parking brake switch assembly) as the parking brake indicator light blinks (red) when the ignition switch is first turned to ON.


WIRING DIAGRAM

for TMC Made:
C424862E05
3.573,2.833 4.052,3.115 0.479,0.281 10 false ECM 2.948,3.188 4.844,3.385 1.896,0.198 10 false : CAN Communication Line 5.594,3.063 7.156,3.469 1.563,0.406 10 false Skid Control ECU (Brake Actuator Assembly) 0.208,2.51 2.885,2.76 2.677,0.25 10 false Clutch Pedal Stroke Sensor Assembly 3.344,1.01 3.823,1.292 0.479,0.281 10 false VCCL 3.344,1.458 3.823,1.74 0.479,0.281 10 false CLS 3.354,1.938 3.833,2.219 0.479,0.281 10 false E2CL 1.729,1.354 2.208,1.635 0.479,0.281 10 false OUT 1.729,1.813 2.208,2.094 0.479,0.281 10 false GND 1.688,0.896 2.167,1.177 0.479,0.281 10 false VDD 5.583,2.854 6.063,3.135 0.479,0.281 10 false A42 3.219,2.813 3.698,3.094 0.479,0.281 10 false C74 0.208,2.344 0.688,2.625 0.479,0.281 10 false A47 3.042,0.896 3.521,1.177 0.479,0.281 10 false 89 3.01,1.354 3.49,1.635 0.479,0.281 10 false 119 3.021,1.792 3.5,2.073 0.479,0.281 10 false 87 2.125,1.802 2.604,2.083 0.479,0.281 10 false 1 2.115,1.344 2.594,1.625 0.479,0.281 10 false 2 2.115,0.885 2.594,1.167 0.479,0.281 10 false 3

for TMMT Made:
C424862E06
3.573,2.854 4.052,3.135 0.479,0.281 10 false ECM 2.948,3.188 4.844,3.385 1.896,0.198 10 false : CAN Communication Line 5.594,3.063 7.156,3.469 1.563,0.406 10 false Skid Control ECU (Brake Actuator Assembly) 0.208,2.51 2.885,2.76 2.677,0.25 10 false Clutch Pedal Stroke Sensor Assembly 3.344,1.01 3.823,1.292 0.479,0.281 10 false VCCL 3.344,1.458 3.823,1.74 0.479,0.281 10 false CLS 3.354,1.938 3.833,2.219 0.479,0.281 10 false E2CL 1.729,1.354 2.208,1.635 0.479,0.281 10 false OUT 1.729,1.813 2.208,2.094 0.479,0.281 10 false GND 1.688,0.896 2.167,1.177 0.479,0.281 10 false VDD 5.583,2.854 6.063,3.135 0.479,0.281 10 false A42 3.219,2.844 3.698,3.125 0.479,0.281 10 false C62 0.208,2.344 0.688,2.625 0.479,0.281 10 false A47 3.042,0.896 3.521,1.177 0.479,0.281 10 false 89 3.01,1.354 3.49,1.635 0.479,0.281 10 false 119 3.021,1.792 3.5,2.073 0.479,0.281 10 false 87 2.125,1.802 2.604,2.083 0.479,0.281 10 false 1 2.115,1.344 2.594,1.625 0.479,0.281 10 false 2 2.115,0.885 2.594,1.167 0.479,0.281 10 false 3

PROCEDURE

1.CHECK DTC
a.

Turn the ignition switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the GTS on.


e.

Check for DTC.

Click hereBrake>PARKING BRAKE>ELECTRIC PARKING BRAKE SYSTEM>DTC CHECK / CLEAR

Chassis > ABS/VSC/TRC/EPB > Trouble Codes
50001 105
Result:
Result Proceed to
DTC P0805 and a CAN DTC are output at the same time A
DTC P0805 is output and the MIL is illuminated B
Only DTC P0805 is output (for LHD) C
Only DTC P0805 is output (for RHD) D
DTCs are not output E




A

B

C

REPLACE SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY)

D

REPLACE SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY)

E