2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

B2414 Steering Position Sensor Malfunction

Diagnostic trouble codes · Vehicles built Oct 2006 – May 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009

DESCRIPTION

The AFS ECU receives the signals indicating the swerve-angle from the steering angle sensor using CAN communication.
DTC No.
DTC Detecting Condition
Trouble Area
B2414
  1. Malfunction in steering angle sensor
  2. AFS ECU
  1. Steering angle sensor
  2. AFS ECU

WIRING DIAGRAM

E136266E01

INSPECTION PROCEDURE


1. READ VALUE USING INTELLIGENT TESTER
  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch on (IG) and turn the intelligent tester main switch on.

  1. Select the item below in the DATA LIST and read the display on the intelligent tester.

    AFS ECU: 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    Steer Sens Sig
    Steering angle sensor signal value / -382.5° to 382.5°
    Approx. 0° (When steering wheel is straight)
    -

    OK:
    Normal condition listed above is displayed.



OK
REPLACE AFS ECU
NG


2. CHECK DTC (CAN COMMUNICATION SYSTEM)

OK:
Normal system code is output.



NG
GO TO CAN COMMUNICATION SYSTEM
OK


3. CHECK DTC (VEHICLE STABILITY CONTROL SYSTEM)

HINT:
(Click here)

OK:
Normal system code is output.



NG
GO TO VEHICLE STABILITY CONTROL SYSTEM
OK


4. REPLACE STEERING ANGLE SENSOR

OK:
Returns to normal operation.



NG
REPLACE AFS ECU
OK

END


← B2412 Headlight Swivel Motor LH Malfunction (+ B2413) (from Oct 2006)B2414 Steering Position Sensor Malfunction (from Jun 2009) →