REMOVAL
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Manual Seat) |
- CAUTION:
- Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (Click here).
| 2. REMOVE FRONT SEAT HEADREST ASSEMBLY |
| 3. REMOVE OUTER SEAT TRACK BRACKET COVER (for Manual Seat) |
for RHD: (Click here)
| 4. REMOVE INNER SEAT TRACK BRACKET COVER (for Manual Seat) |
for RHD: (Click here)
| 5. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat) |
for RHD: (Click here)
| 6. REMOVE OUTER SEAT TRACK BRACKET COVER (for Power Seat) |
for RHD: (Click here)
| 7. REMOVE INNER SEAT TRACK BRACKET COVER (for Power Seat) |
for RHD: (Click here)
| 8. REMOVE FRONT SEAT ASSEMBLY (for Power Seat) |
for RHD: (Click here)
| 9. REMOVE FRONT INNER SEAT CUSHION SHIELD (for Manual Seat) |
for RHD: (Click here)
| 10. REMOVE FRONT INNER SEAT CUSHION SHIELD (for Power Seat) |
for RHD: (Click here)
| 11. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Manual Seat) |
for LHD:

Disengage the 2 hooks.
Disconnect the connectors and disengage 2 clamps.

Remove the nut and front seat inner belt assembly.

for RHD:
Disengage the 2 hooks.
Disconnect the connectors and disengage 2 clamps.
Remove the nut and front seat inner belt assembly.

| 12. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Power Seat) |
for LHD:

Disengage the 2 hooks.
Disconnect the connectors and disengage each clamp.

Disconnect the connector. (for Driver Seat)
Remove the nut and front seat inner belt assembly.


for RHD Driver Seat:

Disengage the 2 hooks.
Disconnect the connector and disengage the 3 clamps.

Disconnect the connector.

Remove the nut and front seat inner belt assembly.
for RHD Passenger Seat:
Disengage the 2 hooks.
Disconnect the connector and disengage the 3 clamps.
Remove the nut and front seat inner belt assembly.

