2006-2011 Camry Aurion · Service Manual ENGINE

PROBLEM SYMPTOMS TABLE

Troubleshooting · Vehicles built from Jun 2009

HINT:
Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

Smart Entry and Start System 
Symptom
Suspected Area
See page
Power does not turn on (neither ACC nor IG is possible).
1. AM2 Fuse
Click here
2. Engine Switch
-
3. Wire Harness or Connector
-
4. Smart Entry and Start System (Entry Function)
-
5. Main Body ECU (Instrument Panel Junction Block Assembly)
-
6. Certification ECU (Smart Key ECU Assembly)
-
7. ID Code Box (Immobiliser Code ECU)
-
8. Steering Lock ECU (Steering Lock Actuator Assembly)
-
Power is not turned on (only ACC is not turned on).
1. AM2 Fuse
Click here
2. ACC Relay
-
3. Wire Harness or Connector
-
4. Main Body ECU (Instrument Panel Junction Block Assembly)
-
Power is not turned on (only IG is not turned on).
1. AM2 Fuse
Click here
2. IG1 Relay
-
3. IG2 Relay
-
4. Wire Harness or Connector
-
5. Main Body ECU (Instrument Panel Junction Block Assembly)
-
Engine does not start.
1. Smart Entry and Start System (Entry)
Click here
2. Engine Switch
-
3. Shift Lock Control ECU
-
4. STOP Fuse
-
5. Stop Light Switch
-
6. Electrical Steering Lock Function
-
7. ST CUT Relay
-
8. Park/Neutral Position Switch
-
9. ST Relay
-
10. ECM
-
11. Engine Immobiliser System
-
12. Main Body ECU (Instrument Panel Junction Block Assembly)
-
13. Wire Harness or Connector
-
Engine switch indicator light does not come on.
Engine Switch Indicator Light Circuit
Click here
← HOW TO PROCEED WITH TROUBLESHOOTING (from Jun 2009)TERMINALS OF ECU (from Jun 2009) →