Panel Switches do not Function
Circuit diagnosis · Vehicles built from Jun 2009
INSPECTION PROCEDURE
| 1. CHECK PANEL SWITCH |
Check for foreign matter around the switches that might prevent operation.
- OK:
- No foreign matter is found.
|
|
||||
| OK | |
| 2. CHECK PANEL SWITCH (OPERATION CHECK) |
Enter "Function Check/Setting" mode (Panel&Steering Switch Check Mode) (Click here).

Operate the abnormal switch and check if the switch name and status are correctly displayed.
- OK:
- The switch name and status are correctly displayed as operated.
- Result:
Result
Proceed to
NG
A
OK
(for 2GR-FE RHD)
B
OK
(except 2GR-FE RHD)
C
|
|
||||
|
|
||||
| A | ||
| ||
