2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

Illumination for Panel Switch does not Come on with Tail Switch ON

Circuit diagnosis · Vehicles built from Jun 2009

INSPECTION PROCEDURE


1. CHECK VEHICLE SIGNAL (OPERATION CHECK)

  1. E194116
    Enter "Function Check/Setting" mode (Vehicle Signal Check Mode) (Click here).

  1. Check that the display changes between ON and OFF according to the light control switch operation.

    OK:
    Light Control Switch
    Display
    Tail or on
    ON
    Off
    OFF

    HINT:
    This display is updated once per second. As a result, it is normal for the display to lag behind the actual change in the switch.

    Result:
    Result
    Proceed to
    NG
    A
    OK
    (for 2GR-FE RHD)
    B
    OK
    (except 2GR-FE RHD)
    C



B
REPLACE RADIO AND DISPLAY ASSEMBLY (for 2GR-FE RHD) (Click here)

C
REPLACE RADIO AND DISPLAY ASSEMBLY (except 2GR-FE RHD) (Click here)
A

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← Radio Broadcast cannot be Received or Poor Reception (from Jun 2009)Panel Switches do not Function (from Jun 2009) →