12601B
1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
17750A
2.REMOVE INLET AIR CLEANER ASSEMBLY
3.REMOVE AIR CLEANER CAP SUB-ASSEMBLY
17801
4.REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
5.REMOVE AIR CLEANER CASE SUB-ASSEMBLY
89170
6.REMOVE AIRBAG SENSOR ASSEMBLY
78110K
7.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY (for LHD)
46410
8.DISCONNECT NO. 1 PARKING BRAKE CABLE ASSEMBLY (for LHD)
Turn back the floor carpet.
Remove the bolt and nut, and disconnect the No. 1 parking brake cable assembly.
33820B
9.REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY (for LHD)
Move the shift lever to N.
Disconnect the end of the transmission control cable assembly from the lower shift lever assembly.
Disengage the 2 claws and disconnect the transmission control cable assembly from the lower shift lever assembly.
Disconnect the wire harness clamp.
Remove the nut and clip, and disconnect the transmission control cable assembly.
Turn back the dash panel insulator.
Remove the 2 bolts and pull out the transmission control cable assembly from the body.
33820B
10.REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY (for RHD)
Move the shift lever to N.
Disconnect the end of the transmission control cable assembly from the lower shift lever assembly.
Disengage the 2 claws and disconnect the transmission control cable assembly from the lower shift lever assembly.
Disconnect the wire harness clamp.
Remove the nut and clip, and disconnect the transmission control cable assembly.
Turn back the floor carpet.
| *1 | No. 1 Parking Brake Cable Assembly |
| *2 | Transmission Control Cable Assembly |
Remove the bolt and disconnect the No. 1 parking brake cable assembly.
Turn back the dash panel insulator.
Remove the 2 bolts and pull out the transmission control cable assembly from the body.