Home › Drivetrain › EB62 MANUAL TRANSMISSION / TRANSAXLE › TRANSMISSION CONTROL CABLE › 2011.10–2013.07
RM19V0EQ _52 Drivetrain _014584 EB62 MANUAL TRANSMISSION / TRANSAXLE _0073999 TRANSMISSION CONTROL CABLE A

EB62 MANUAL TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  REMOVAL  


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 17750A 2.REMOVE INLET AIR CLEANER ASSEMBLY

Hide 17735 3.REMOVE AIR CLEANER CAP SUB-ASSEMBLY

Hide 17801 4.REMOVE AIR CLEANER FILTER ELEMENT

Hide 5.REMOVE AIR CLEANER CASE SUB-ASSEMBLY

Hide 89170 6.REMOVE CENTER AIRBAG SENSOR ASSEMBLY

Hide 58995A 7.REMOVE NO. 1 CONSOLE BOX MOUNTING BRACKET

Hide 78110K 8.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

Hide 33820B 9.REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

a.
C248125C01
1.323,1.188 1.188,0.5 1.188,0.5 0.99,0.5 false 2.323,1.479 2.448,1.844 2.448,1.844 2.583,1.844 false 0.76,0.406 1.063,0.667 0.302,0.26 10 false *1 2.646,1.76 2.948,2.021 0.302,0.26 10 false *2
*1 Transmission Control Select Cable
*2 Transmission Control Shift Cable


Remove the clip and separate the transmission control select cable from the floor shift lever assembly.


b.

Separate the transmission control shift cable from the floor shift lever assembly.


c.
C135402C01
1.635,0.771 1.792,0.771 1.792,0.771 1.99,0.99 false 1.375,0.677 1.646,0.927 0.271,0.25 10 false *1
*1 Transmission Control Cable Assembly Lock


Pull out the transmission control cable assembly lock.


d.
C132953

Turn the adjusting nut 180° clockwise. While holding the adjusting nut in that position, separate the transmission control cable assembly from the floor shift lever assembly.

NOTICE:

Do not rotate the nut excessively as the internal spring may come off and the transmission control cable assembly will not be reusable.



e.
C248128

Remove the 4 clips and disconnect the transmission control cable assembly from the control cable bracket.


f.
C203189

Remove the 2 bolts and transmission control cable assembly.