This DTC is stored when items controlled by the main body ECU (multiplex network body ECU) cannot be customized via the navigation system vehicle customization screen.
Power door lock control system
Wireless door lock control system (w/ Smart Entry and Start System)
Wireless door lock control system (w/o Smart Entry and Start System)
Lighting system (for Interior)
Lighting system (for Exterior)
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B15F6 | Main Body ECU Vehicle Information Reading/Writing Process Malfunction | Main body ECU (multiplex network body ECU) vehicle setting processing error. | ·
CAN communication system ·
Power door lock control system ·
Wireless door lock control system (w/ Smart Entry and Start System) ·
Wireless door lock control system (w/o Smart Entry and Start System) ·
Lighting system (for Interior) ·
Lighting system (for Exterior) ·
Main body ECU (multiplex network body ECU) ·
Navigation ECU Sub-assembly |
Use the intelligent tester to check if the CAN communication system is functioning normally.
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
CAN communication DTCs are not output.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
Check if the power door lock control system is malfunctioning.
Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
Customization may not be possible depending on the malfunction in the power door lock control system.
No malfunctions are present in the power door lock control system.
Proceed to the next step based on the check result.
| Result | Proceed to |
|---|---|
| OK (w/ Smart Entry and Start System) | A |
| OK (w/o Smart Entry and Start System) | B |
| NG | C |
A
B
C
Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
Check if the wireless door lock control system is malfunctioning.
Customization may not be possible depending on the malfunction in the wireless door lock control system.
No malfunctions are present in the wireless door lock control system.
Proceed to the next step based on the check result.
| Result | Proceed to |
|---|---|
| NG | A |
| OK | B |
A
B
Check if the wireless door lock control system is malfunctioning.
Customization may not be possible depending on the malfunction in the wireless door lock control system.
No malfunctions are present in the wireless door lock control system.
Proceed to the next step based on the check result.
| Result | Proceed to |
|---|---|
| NG | A |
| OK | B |
A
B
Check if the lighting system (for Interior) is malfunctioning.
Click hereVehicle Interior>LIGHTING (INT)>LIGHTING SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
Customization may not be possible depending on the malfunction in the lighting system (for Interior).
No malfunctions are present in the lighting system (for Interior).
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check if the lighting system (for Exterior) is malfunctioning.
Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
Customization may not be possible depending on the malfunction in the lighting system (for Exterior).
No malfunctions are present in the lighting system (for Exterior).
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Display the "Door lock settings" or "Lights settings" screen.
Make a note of the customizable items for each main body ECU (multiplex network body ECU) related system.
These items shown as customizable via the navigation system vehicle customization screen can also be changed using the intelligent tester. In a following step, the intelligent tester will be used.
To match-up the items in the multi-display with the items on the intelligent tester, check the customize parameters list for the power door lock control system related items that can be customized via the multi-display screen.
Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>CUSTOMIZE PARAMETERS
To match-up the items in the multi-display with the items on the intelligent tester, check the customize parameters list for the wireless door lock control system (w/ Smart Entry and Start System) related items that can be customized via the multi-display screen.
To match-up the items in the multi-display with the items on the intelligent tester, check the customize parameters list for the wireless door lock control system (w/o Smart Entry and Start System) related items that can be customized via the multi-display screen.
To match-up the items in the multi-display with the items on the intelligent tester, check the customize parameters list for the lighting system (for Interior) related items that can be customized via the multi-display screen.
Click hereVehicle Interior>LIGHTING (INT)>LIGHTING SYSTEM>CUSTOMIZE PARAMETERS
To match-up the items in the multi-display with the items on the intelligent tester, check the customize parameters list for the lighting system (for Exterior) related items that can be customized via the multi-display screen.
Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>CUSTOMIZE PARAMETERS
Using the intelligent tester, confirm that it is possible to change the settings of the customize parameters that are available for customization via the multi-display screen.
The items available for customization via the multi-display screen can be customized successfully using the intelligent tester.
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION RECEIVER(for HDD)>REMOVAL
NG