DTC C1288 Error in Matching of ECUs |
| DTC No. | DTC Detection Condition | Trouble Area |
| C1288 | ECM does not match. | ECM |
| 1.CHECK CAN COMMUNICATION SYSTEM |
Check if a CAN communication system DTC is output (Click here).
| Result | Proceed to |
| DTC is not output. | A |
| DTC is output. | B |
|
| ||||
| A | |
| 2.PERFORM SYSTEM VARIANT LEARNING |
Perform system variant learning (Click here).
| NEXT | |
| 3.RECONFIRM DTC |
Turn the ignition switch off.
Clear the DTCs (Click here).
Turn the ignition switch off.
Start the engine.
Check if the same DTC is output (Click here).
| Result | Proceed to |
| DTC C1288 is not output. | A |
| DTC C1288 is output (for 2GR-FE). | B |
| DTC C1288 is output (for 2AR-FE). | C |
| DTC C1288 is output (for 1AZ-FE). | D |
|
| ||||
|
| ||||
|
| ||||
| A | ||
| ||