ENGINE > GENERAL MAINTENANCE |
| 1. INSPECT DRIVE BELT |
Check the drive belt.
| Type | See procedures |
| 2AR-FE |
Click here
|
| 2GR-FE |
Click here
|
| 2. REPLACE ENGINE OIL AND OIL FILTER |
Check the engine oil and oil filter.
| Type | See procedures |
| 2AR-FE |
Click here
|
| 2GR-FE |
Click here
|
| 3. REPLACE ENGINE COOLANT |
Check the engine coolant.
| Type | See procedures |
| 2AR-FE |
Click here
|
| 2GR-FE |
Click here
|
| 4. INSPECT SPARK PLUGS |
Check the spark plugs.
| Type | See procedures |
| 2AR-FE |
Click here
|
| 2GR-FE |
Click here
|
| 5. INSPECT BATTERY |
Check the battery.
| Type | See procedures |
| 2AR-FE |
Click here
|
| 2GR-FE |
Click here
|
| 6. INSPECT AIR CLEANER FILTER ELEMENT |
Remove the air filter.
![]() |
Check that the air cleaner is not excessively dirty.
If the air cleaner is excessively dirty, replace the air cleaner filter element.
If cleaning the air cleaner filter element, blow compressed air as shown in the illustration to clean it.
Reinstall the air filter.
When an excessive amount of dirt is present, replace the air filter.
| 7. INSPECT EXHAUST PIPES AND MOUNTINGS |
Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.
| 8. INSPECT FUEL TANK CAP ASSEMBLY |
Check the fuel tank cap gasket.
| Type | See procedures |
| 2AR-FE |
Click here
|
| 2GR-FE |
Click here
|
| 9. INSPECT FUEL LINES, CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BANDS |
Visually check the fuel lines and hoses for cracks, leaks, loose connections, or deformation.
Check for tank band looseness or deformation.
| 10. INSPECT CHARCOAL CANISTER |
Check the charcoal canister.
| Type | See procedures |
| 2AR-FE |
Click here
|
| 2GR-FE |
Click here
|