1.RECOVER REFRIGERANT FROM AIR CONDITIONING SYSTEM
2.REMOVE RADIATOR ASSEMBLY
16361A
3.REMOVE V-RIBBED BELT
88711
4.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
Disconnect the 3 connectors.
Disengage the 2 clamps.
Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor and magnetic clutch.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
88704
5.DISCONNECT SUCTION HOSE SUB-ASSEMBLY
Remove the bolt and disconnect the suction hose sub-assembly from the compressor and magnetic clutch.
Remove the O-ring from the suction hose sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
6.REMOVE COMPRESSOR AND MAGNETIC CLUTCH
Remove the 4 bolts and compressor and magnetic clutch and bracket.