Home › Vehicle Interior › METER / GAUGE / DISPLAY › COMBINATION METER › from 2015.04
RM2030EQ _58 Vehicle Interior _014667 METER / GAUGE / DISPLAY _0074617 COMBINATION METER A

METER / GAUGE / DISPLAY  COMBINATION METER  INSTALLATION  


PROCEDURE

Hide 83100 1.INSTALL COMBINATION METER ASSEMBLY

a.

Connect the 2 connectors.


b.

Engage the wire harness clamp.


c.

Install the combination meter assembly with the 4 screws.


Hide 55410C 2.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 55650 3.INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55431B 4.INSTALL UPPER INSTRUMENT PANEL FINISH PANEL (for RHD)

Hide 62312B 6.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP

Hide 7.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION