Home › Vehicle Interior › INTERIOR PANELS / TRIM › INSTRUMENT PANEL SAFETY PAD › from 2015.04
RM2030EQ _58 Vehicle Interior _014674 INTERIOR PANELS / TRIM _0074672 INSTRUMENT PANEL SAFETY PAD A

INTERIOR PANELS / TRIM  INSTRUMENT PANEL SAFETY PAD  INSTALLATION  


PROCEDURE

Hide 1.INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY

a.

Engage the 5 guides and temporarily install the instrument panel safety pad assembly as shown in the illustration.

B281791

NOTICE:
·

Do not damage the instrument panel safety pad assembly.

·

Do not allow the wire harnesses to interfere with the surrounding parts.




b.

Install the 2 clips.


c.

Install the 3 bolts <B> and nut <D>.


d.

Install the 2 passenger airbag bolts <A>.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


e.
B284918

Install the glove box light as shown in the illustration.


f.

Engage each clamp.


g.

Connect each connector.


Hide 55011A 3.INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

a.
B280295

Engage the 10 clips to install the No. 1 instrument panel garnish sub-assembly as shown in the illustration.


Hide 55480D 4.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

a.

for LHD:

i.

Connect the connector.



b.

Engage the 3 clips and guide to install the lower instrument panel finish panel assembly.


Hide 58816B 5.INSTALL CONSOLE BOX INSERT

a.

for RHD:

i.

Engage the 2 claws to connect the room temperature sensor.



b.
B281779

Engage the clip and 4 guides as shown in the illustration.


c.

Install the console box insert with the 2 screws <C>.


Hide 58817A 6.INSTALL FRONT NO. 2 CONSOLE BOX INSERT

a.

for LHD:

i.

Engage the 2 claws to connect the room temperature sensor.



b.
B281776

Engage the clip and 4 guides as shown in the illustration.


c.

Install the front No. 2 console box insert with the 2 screws <C>.


Hide 86160P 7.INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side)

HINT:

Use the same procedure as for the LH side.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>INSTALLATION


Hide 55409F 8.INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

a.
B279898

Engage the 2 guides.


b.

Engage the 3 claws and 2 clips to install the No. 2 instrument panel speaker panel sub-assembly.


Hide 62211 9.INSTALL FRONT PILLAR GARNISH RH

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION


Hide 86160J 10.INSTALL FRONT NO. 3 SPEAKER ASSEMBLY (for 10 Speakers)

Hide 55510F 11.INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

a.

Connect the connector.


b.
B281762

Engage the 6 clips to install the No. 1 speaker opening cover assembly.


Hide 86160P 12.INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side)

Hide 55408F 13.INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

a.
B280307

Engage the 2 guides.


b.

Engage the 3 claws and 2 clips to install the No. 1 instrument panel speaker panel sub-assembly.


Hide 62212 14.INSTALL FRONT PILLAR GARNISH LH

Hide 55670 15.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

a.
B281772

Engage the 10 clips to install the No. 3 instrument panel register assembly.


Hide 55303B 16.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

a.
B281770

Engage the 2 clips and 4 guides.


b.

Install the 3 screws <C>.


c.

Close the lower instrument panel door.


d.

Install the lower instrument panel sub-assembly with the bolt <B> and screw <C>.


Hide 55607 17.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

a.

Connect the connector.


b.

Engage the 2 guides and 4 claws to install the No. 2 instrument panel under cover sub-assembly.


Hide 55317A 18.INSTALL INSTRUMENT SIDE PANEL RH

a.
B281766

Engage the 3 guides as shown in the illustration.


b.
B281764

Engage the 4 claws to install the instrument side panel RH as shown in the illustration.


Hide 62311B 19.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

Hide 62111A 20.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION


Hide 67913 21.INSTALL FRONT DOOR SCUFF PLATE RH

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION


Hide 22.INSTALL RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (w/o Navigation System)

Hide 23.INSTALL NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (w/ Navigation System)

Hide 74110E 24.INSTALL FRONT ASH RECEPTACLE ASSEMBLY

a.

Connect each connector.


b.
B384414

Engage the 2 clips.


c.

Install the front ash receptacle assembly with the 2 screws <C>.


Hide 58831A 25.INSTALL FRONT CONSOLE UPPER PANEL GARNISH

a.

Connect each connector.


b.
B392571

Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.


Hide 55660 26.INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

a.

Connect the connector.


b.
B384416

Engage the 4 clips to install the No. 2 instrument panel register assembly.

NOTICE:

When installing the No. 2 instrument panel register assembly, check that the wire harness is not caught between the No. 2 instrument panel register assembly and duct.



Hide 55405B 27.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

a.
B283351

Engage the 7 clips and 2 guides to install the center instrument cluster finish panel sub-assembly.


Hide 58815A 29.INSTALL CONSOLE BOX CARPET

Hide 58864B 30.INSTALL NO. 4 CONSOLE BOX DUCT

Hide 58801E 31.INSTALL UPPER CONSOLE BOX SUB-ASSEMBLY

Hide 58805C 32.INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY

Hide 33504F 33.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

Hide 53921B 34.INSTALL FRONT PANEL GARNISH RH

a.
B392570

Engage the 3 clips and 8 guides to install the front panel garnish RH.


Hide 55432D 35.INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

a.

for LHD:

i.

Engage the 5 clips and 3 guides.


ii.

Install the lower No. 1 instrument panel finish panel with the 2 bolts <B>.



b.

for RHD:

i.

Connect each connector.


ii.

Engage the 4 claws, 9 clips and 3 guides.


iii.

Install the lower No. 1 instrument panel finish panel with the 2 bolts <B>.



Hide 53601 36.CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

a.

Engage the claw and 2 guides to connect the hood lock control lever sub-assembly.


Hide 53922B 37.INSTALL FRONT PANEL GARNISH LH

a.
B392509

Engage the 3 clips and 8 guides to install the front panel garnish LH.


Hide 83100 38.INSTALL COMBINATION METER ASSEMBLY

Hide 55410C 39.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

a.
B308095

Temporarily install the instrument cluster finish panel assembly as shown in the illustration.


b.

Connect each connector.


c.

for LHD:

i.

Engage the 3 claws, 7 clips and 4 guides.



d.

for RHD:

i.

Engage the 4 claws, 5 clips and 4 guides.



e.
B395313

Engage the 4 clips and 2 guides to install the instrument cluster finish panel assembly.


Hide 55650 40.INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

a.
B308096

Engage the 4 clips to install the No. 1 instrument panel register assembly.


Hide 55431B 41.INSTALL UPPER INSTRUMENT PANEL FINISH PANEL (for RHD)

a.

Connect the connector.


b.
B401552

Engage the 2 claws and 4 clips to install the upper instrument panel finish panel.


Hide 55318C 42.INSTALL INSTRUMENT SIDE PANEL LH

a.
B308098

Engage the 3 guides.


b.
B308099

Engage the 4 claws to install the instrument side panel LH as shown in the illustration.


Hide 62312B 43.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

Hide 62112A 44.INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

Hide 67914 45.INSTALL FRONT DOOR SCUFF PLATE LH

Hide 46.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION