Home › Vehicle Interior › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY › from 2016.05
RM2030EQ _58 Vehicle Interior _014671 SEAT BELT _0074648 REAR SEAT OUTER BELT ASSEMBLY A

SEAT BELT  REAR SEAT OUTER BELT ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 73370C 1.INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

Hide 73370C 2.INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

a.

Engage the guide to temporarily install the rear No. 1 seat outer belt assembly LH.


b.

Install the rear seat outer belt assembly with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


c.

Check if the ELR locks.

NOTICE:

The check should be performed with the rear No. 1 seat outer belt assembly LH installed.


i.

With the belt assembly installed, check that the belt locks when it is pulled out quickly.



Hide 73360C 3.INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 64330 4.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)

a.

Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly.


b.
B279552

Engage the 5 guides and 3 clips to install the package tray trim panel assembly.


c.

Connect the connector.


Hide 64330 5.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)

a.

Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly.


b.
B279551

Engage the guide and 3 clips to install the package tray trim panel assembly.


Hide 73373 6.INSTALL REAR SEAT SHOULDER BELT COVER

a.
B271098

Engage the 4 guides and 2 claws to install the rear seat shoulder belt cover.

HINT:

Use the same procedure for the other 2 rear seat shoulder belt covers.



Hide 62472A 7.INSTALL ROOF SIDE INNER GARNISH LH

Hide 62471A 8.INSTALL ROOF SIDE INNER GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 62332A 9.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

Hide 62331A 10.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

Hide 73370C 11.CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

a.
B279441C26
2.219,2.448 1.271,2.729 1.271,2.729 2.292,3.083 false 2.885,2.938 1.271,2.729 false 1.052,2.635 1.313,2.896 0.26,0.26 10 false *a
*a Protruding Part


Connect the floor anchor of the rear No. 1 seat outer belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the rear No. 1 seat outer belt assembly LH to overlap the protruding parts of the floor panel.



Hide 73360C 12.CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH

a.
B293617C09
1.219,2.365 2.021,2.667 2.021,2.667 1.313,2.969 false 0.677,3.021 2.021,2.667 false 2.083,2.583 2.406,2.823 0.323,0.24 10 false *a
*a Protruding Part


Connect the floor anchor of the rear No. 1 seat outer belt assembly RH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the rear No. 1 seat outer belt assembly RH to overlap the protruding parts of the floor panel.



Hide 73480 13.CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for LHD)

Hide 73480 14.CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for RHD)

Hide 15.INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH (for LHD)

Hide 16.INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH (for RHD)

Hide 17.INSTALL REAR SEATBACK ASSEMBLY LH

Hide 18.INSTALL REAR SEATBACK ASSEMBLY RH

Hide 19.INSTALL REAR SIDE SEATBACK ASSEMBLY LH

Hide 20.INSTALL REAR SIDE SEATBACK ASSEMBLY RH

Hide 72693 21.INSTALL REAR SEAT CUSHION LOCK HOOK

Hide 22.INSTALL REAR SEAT CUSHION ASSEMBLY