Home › Vehicle Interior › HEATING / AIR CONDITIONING › COOLER EXPANSION VALVE
RM2040EQ _58 Vehicle Interior _014730 HEATING / AIR CONDITIONING _0075113 COOLER EXPANSION VALVE A

HEATING / AIR CONDITIONING  COOLER EXPANSION VALVE  REMOVAL  


PROCEDURE

Hide 1. RECOVER REFRIGERANT FROM AIR CONDITIONING SYSTEM

Hide 2.REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

Hide 55702A 3.REMOVE FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY

Hide 88704 4.DISCONNECT SUCTION HOSE SUB-ASSEMBLY

Hide 88710E 5.DISCONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY

Hide 88515 6.REMOVE COOLER EXPANSION VALVE

a.
E226871

Using a 4 mm hexagon wrench, remove the 2 hexagon bolts.


b.
E226872C09
1.458,1.677 0.75,1.896 false 0.573,1.802 0.969,2.073 0.396,0.271 10 false *a
*a Bolt for Suction Hose Sub-assembly


Temporarily install the bolt for the suction hose halfway to the cooler expansion valve.


c.
E226873

Hold the bolt and pull it to remove the cooler expansion valve as shown in the illustration.


d.
E226874C07
1.104,1.375 0.635,1.74 false 0.427,1.688 0.823,1.969 0.396,0.281 10 false *1
*1 No. 1 Cooler Evaporator Sub-assembly


Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.