1. RECOVER REFRIGERANT FROM AIR CONDITIONING SYSTEM
2.REMOVE FRONT BUMPER ASSEMBLY
52611
3.REMOVE FRONT BUMPER ENERGY ABSORBER
52021
4.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
17750A
5.REMOVE INLET AIR CLEANER ASSEMBLY
G9257
6.REMOVE NO. 5 INVERTER BRACKET
53510
7.REMOVE HOOD LOCK ASSEMBLY
53216A
8.REMOVE UPPER RADIATOR SUPPORT
53293C
9.REMOVE RADIATOR SIDE DEFLECTOR RH
53294C
10.REMOVE RADIATOR SIDE DEFLECTOR LH
Disengage the 3 claws and guide, and remove the radiator side deflector LH.
88711
11.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
88710E
12.DISCONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY
Remove the bolt and disconnect the air conditioner tube and accessory assembly from the cooler condenser assembly.
Remove the O-ring from the air conditioner tube and accessory assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
88460
13.REMOVE COOLER CONDENSER ASSEMBLY
Remove the 4 bolts.
Pull the radiator assembly in the direction indicated by the arrow.
Remove the 2 bolts.
Remove the cooler condenser assembly as shown in the illustration.