83100
1.INSTALL COMBINATION METER ASSEMBLY
Connect the 2 connectors.
Engage the wire harness clamp.
Install the combination meter assembly with the 4 screws.
55410C
2.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
55670
3.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
55431B
4.INSTALL UPPER INSTRUMENT PANEL FINISH PANEL
55317A
5.INSTALL INSTRUMENT SIDE PANEL RH
62311B
6.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
7.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
64718C
8.INSTALL LUGGAGE TRIM SERVICE HOLE COVER