Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY › from 2016.05
RM2040EQ _58 Vehicle Interior _014729 SEAT BELT _0075104 REAR SEAT INNER BELT ASSEMBLY A

SEAT BELT  REAR SEAT INNER BELT ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 73480 1.INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

Hide 73480 2.INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

a.

Engage the guide and temporarily install the rear seat inner with center belt assembly LH.


b.

Install the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


c.

Check that the ELR locks.

NOTICE:

The check should be performed with the rear seat inner with center belt assembly LH installed.


i.

With the belt assembly installed, check that the belt locks when it is pulled out quickly.



Hide 64330 3.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)

Hide 64330 4.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)

Hide 73373 5.INSTALL REAR SEAT SHOULDER BELT COVER

Hide 62471A 6.INSTALL ROOF SIDE INNER GARNISH RH

Hide 62472A 7.INSTALL ROOF SIDE INNER GARNISH LH

HINT:

Use the same procedure as for the RH side.


Hide 62331A 8.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

Hide 62332A 9.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

Hide 73360C 10.CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH

Hide 73370C 11.CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

Hide 73470B 12.INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH

a.
B444726C02
1.708,1.063 0.438,0.594 0.438,0.594 1.688,0.26 true 0.281,0.51 0.615,0.813 0.333,0.302 10 false *a
*a Protruding Part


Install the rear seat inner with center belt assembly RH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:
·

Install the rear seat inner with center belt assembly RH with the arrow on the anchor part facing the front of the vehicle.

·

Do not allow the anchor part of the rear seat inner with center belt assembly RH to overlap the protruding parts of the floor panel.




Hide 13.INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH

Hide 73480 14.CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

a.
B444725C02
1.729,0.969 0.406,0.583 0.406,0.583 1.698,0.24 true 0.219,0.49 0.573,0.74 0.354,0.25 10 false *a
*a Protruding Part


Connect the floor anchor of the rear seat inner with center belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:
·

Install the rear seat inner with center belt assembly LH with the arrow on the anchor part facing the front of the vehicle.

·

Do not allow the anchor part of the rear seat inner with center belt assembly LH to overlap the protruding parts of the floor panel.




Hide 15.INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH

Hide 16.INSTALL REAR SIDE SEATBACK ASSEMBLY LH

Hide 17.INSTALL REAR SIDE SEATBACK ASSEMBLY RH

Hide 18.INSTALL REAR SEATBACK ASSEMBLY LH

Hide 64277C 19.INSTALL NO. 2 ROOM PARTITION COVER

Hide 20.INSTALL REAR SEATBACK ASSEMBLY RH

Hide 72693 21.INSTALL REAR SEAT CUSHION LOCK HOOK

Hide 22.INSTALL REAR SEAT CUSHION ASSEMBLY