POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on Front Door Windows) > Jam Protection Function does not Operate |
| 1.PERFORM INITIALIZATION (APPLICABLE LOCATION) |
Initialize the power window regulator motor assembly (applicable location) (Click here).
| NEXT | |
| 2.CHECK POWER WINDOW CONTROL SYSTEM (AUTO UP / DOWN FUNCTION) |
Check if the power window auto up and down function operates normally (Click here).
|
| ||||
| OK | |
| 3.CHECK JAM PROTECTION FUNCTION OPERATING RANGE |
Check if the jam protection function operates normally for the applicable power window.
|
| ||||
| OK | ||
| ||