Home › Suspension › FRONT SUSPENSION › FRONT LOWER SUSPENSION ARM (for 2AR-FE, 6AR-FSE RH Side) › 2018.04–2021.02
RM33A0E _53 Suspension _065361 FRONT SUSPENSION _0352045 FRONT LOWER SUSPENSION ARM(for 2AR-FE, 6AR-FSE RH Side) A

FRONT SUSPENSION  FRONT LOWER SUSPENSION ARM(for 2AR-FE, 6AR-FSE RH Side)  INSTALLATION  


PROCEDURE

Hide 48068 1.INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

a.

Install the front lower arm bushing stopper to the front lower No. 1 suspension arm sub-assembly RH.


b.
C373238N01
2.729,0.375 2.885,0.573 0.156,0.198 10 true 1 0.688,0.865 0.844,1.063 0.156,0.198 10 false 3 2.083,0.146 2.24,0.344 0.156,0.198 10 true 2

Install the front lower No. 1 suspension arm sub-assembly RH to the front frame assembly with the 3 bolts and nut in the order shown in the illustration.

Torque:
Bolt (1), (2) : 200 N*m (2039 kgf*cm, 148 ft.*lbf)
Bolt (3) : 135 N*m (1377 kgf*cm, 100 ft.*lbf)

NOTICE:

Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.



c.

Connect the front lower No. 1 suspension arm sub-assembly RH to the front lower ball joint assembly RH with the bolt and 2 nuts.

Torque:
92 N*m (938 kgf*cm, 68 ft.*lbf)


Hide 3.INSTALL FRONT WHEEL

Hide 4.INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

Hide 5.PERFORM INITIALIZATION

Parking assist monitor system for Initialization:(Click here)
for Calibration:(Click here)
Panoramic view monitor system for Initialization:(Click here)
for Calibration:(Click here)
Lighting System (EXT) (w/ Automatic Headlight Beam Level Control System) (Click here)