32910
1.INSTALL OIL COOLER ASSEMBLY
Install the oil cooler assembly with the 4 bolts.
Tightening order: Temporarily tighten bolt (A) → Fully tighten bolt (B) → Fully tighten bolt (C) → Fully tighten bolt (A)
2.CONNECT OIL COOLER HOSE
| *a | 0 to 3 mm (0 to 0.118 in.) |
| *b | 2 to 7 mm (0.0787 to 0.276 in.) |
| *c | Paint Mark (Under Side of Vehicle) |
| *d | 30° (Paint Mark Location) |
Connect the 2 oil cooler hoses to the oil cooler assembly and slide the 2 clips to secure them.
Make sure to slide the oil cooler hose until it contacts the hose stopper of the oil cooler assembly.
Make sure that the paint mark of the oil cooler hose is within the location shown in the illustration.
16695A
3.INSTALL FRONT RADIATOR SIDE AIR GUIDE PLATE LH
Engage the 2 clips to install the front radiator side air guide plate LH.
52131A
4.INSTALL FRONT BUMPER REINFORCEMENT
52611
5.INSTALL FRONT BUMPER ENERGY ABSORBER
52618
6.INSTALL FRONT LOWER BUMPER ABSORBER
7.INSTALL FRONT BUMPER ASSEMBLY
8.ADJUST AUTOMATIC TRANSAXLE FLUID
9.INSPECT FOR FLUID LEAK
51441
10.INSTALL NO. 1 ENGINE UNDER COVER
53852K
11.INSTALL FRONT WHEEL OPENING EXTENSION PAD LH
53851M
12.INSTALL FRONT WHEEL OPENING EXTENSION PAD RH