Home › General › MAINTENANCE › GENERAL MAINTENANCE › from 2021.02
RM33A0E _V1 General _065356 MAINTENANCE _0327832 GENERAL MAINTENANCE F

MAINTENANCE  GENERAL MAINTENANCE  ENGINE  


HINT:

Perform these procedures after the engine has cooled down.




REPLACE ENGINE OIL AND OIL FILTER




INSPECT COOLING AND HEATER SYSTEM


a.

Inspect that the radiator and condenser are not blocked with leaves, dirt or insects, and clean them if necessary. Also check the installation condition of the hoses and lines and the connecting parts for corrosion, etc.

A25A-FKS: Click hereEngine / Hybrid System>A25A-FKS (COOLING)>RADIATOR>ON-VEHICLE INSPECTION

2GR-FKS: Click hereEngine / Hybrid System>2GR-FKS (COOLING)>RADIATOR>ON-VEHICLE INSPECTION

M20A-FKS: Click hereEngine / Hybrid System>M20A-FKS (COOLING)>RADIATOR>ON-VEHICLE INSPECTION




REPLACE ENGINE COOLANT






INSPECT AIR CLEANER FILTER ELEMENT


a.

Remove the air cleaner filter element.


b.
A156094

Check that the air cleaner filter element is not excessively dirty.

If the air cleaner filter element is excessively dirty, replace the air cleaner filter element.


c.

If cleaning the air cleaner filter element, blow compressed air as shown in the illustration to clean it.


d.

Reinstall the air cleaner filter element.



INSPECT EXHAUST PIPES AND MOUNTINGS


a.

Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.




INSPECT FUEL LINES, CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES, AND FUEL TANK BANDS


a.

Visually check the fuel lines and hoses for cracks, leaks, loose connections, or deformation.


b.

Check for tank band looseness or deformation.