55435B
1.REMOVE NO. 1 METER HOOD CLUSTER
|
Protective Tape |
Apply protective tape to the area shown in the illustration.
|
Place Hand Here |
|
Remove in this Direction |
Disengage the 3 clips in the order shown in the illustration.
|
Place Hand Here |
|
Remove in this Direction |
Disengage the 4 clips and 3 guides in the order shown in the illustration.
Disconnect the connector to remove the No. 1 meter hood cluster.
55012A
2.REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
|
Place Hand Here |
|
Remove in this Direction |
Disengage the 5 clips in the order shown in the illustration.
|
Place Hand Here |
|
Remove in this Direction |
Disengage the 6 clips in the order shown in the illustration to remove the No. 2 instrument panel garnish sub-assembly.
55476C
3.REMOVE INSTRUMENT PANEL FINISH PLATE GARNISH
|
Remove in this Direction |
Disengage the clip, claw and 2 guides to remove the instrument panel finish plate garnish as shown in the illustration.
55434B
4.REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL
|
Place Hand Here |
|
Remove in this Direction |
Disengage the 2 clips as shown in the illustration.
|
Place Hand Here |
|
Remove in this Direction |
Disengage the 5 clips as shown in the illustration.
Disengage the clamp.
Disconnect each connector to remove the lower center instrument panel finish panel.
33554C
5.REMOVE SHIFT LOCK RELEASE BUTTON COVER
for UA80E:
Click hereDrivetrain>UA80E (AUTOMATIC TRANSMISSION / TRANSAXLE)>SHIFT LEVER>REMOVAL
for UB80E:
Click hereDrivetrain>UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE)>SHIFT LEVER>REMOVAL
for K120:
33504F
6.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
for UA80E:
Click hereDrivetrain>UA80E (AUTOMATIC TRANSMISSION / TRANSAXLE)>SHIFT LEVER KNOB>REMOVAL
for UB80E:
Click hereDrivetrain>UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE)>SHIFT LEVER KNOB>REMOVAL
for K120:
58805C
7.REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
Move the shift lever to N.
Using a moulding remover, disengage the 2 claws and 2 clips as shown in the illustration.
|
Place Hand Here |
|
Remove in this Direction |
Disengage the 5 claws and 4 clips as shown in the illustration.
|
Place Hand Here |
|
Remove in this Direction |
Disengage the clamp.
Disconnect each connector to remove the rear upper console panel sub-assembly.
35978
8.REMOVE SHIFT POSITION INDICATOR
for UA80E:
Click hereDrivetrain>UA80E (AUTOMATIC TRANSMISSION / TRANSAXLE)>SHIFT LEVER>DISASSEMBLY
for UB80E:
Click hereDrivetrain>UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE)>SHIFT LEVER>DISASSEMBLY
for K120:
58804C
9.REMOVE FRONT CONSOLE BOX INSERT SUB-ASSEMBLY
Remove the 5 screws and front console box insert sub-assembly.
55620B
10.REMOVE INSTRUMENT PANEL CUP HOLDER
Remove the 3 screws.
Disengage the 2 claws to remove the instrument panel cup holder.
58903A
11.REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY
|
Place Hand Here |
|
Remove in this Direction |
Disengage the 4 clips as shown in the illustration.
|
Place Hand Here |
|
Remove in this Direction |
Disengage the 6 claws to remove the console rear end panel sub-assembly as shown in the illustration.
w/ Power Outlet Socket:
Disconnect the connector.
58815C
12.REMOVE CONSOLE BOX CARPET
|
Remove in this Direction |
Remove the console box carpet as shown in the illustration.
58810J
13.REMOVE CONSOLE BOX ASSEMBLY
Remove the 4 bolts, 2 screws and console box assembly.