Home › Engine / Hybrid System › A25A-FXS (COOLING) › RADIATOR › 2017.09–2017.12
RM33C0E _51 Engine / Hybrid System _065424 A25A-FXS COOLING _0328477 RADIATOR A

A25A-FXS COOLING  RADIATOR  INSTALLATION  


PROCEDURE

Hide 16535 1.INSTALL LOWER RADIATOR SUPPORT

a.

Install the 2 lower radiator supports to the radiator assembly.


Hide 16523A 2.INSTALL RADIATOR SUPPORT CUSHION

a.

Install the 2 radiator support cushions to the radiator assembly.


Hide 16400 3.INSTALL RADIATOR ASSEMBLY

a.

Engage the 2 guides.


b.

Engage the 2 claws to install the fan with motor assembly to the radiator assembly.

NOTICE:

Do not damage the radiator assembly when installing the fan with motor assembly.



c.

Install the radiator assembly with the fan with motor assembly to the vehicle body.

NOTICE:

Do not apply excessive force to the cooler condenser assembly or pipe when installing the radiator assembly with the fan with motor assembly.



d.

Engage the 2 guides.


e.

Engage the 2 claws to install the cooler condenser assembly to the radiator assembly.

NOTICE:

Make sure not to damage the cooler condenser assembly when installing the cooler condenser assembly.



f.
A407203

Engage the wire harness clamp.


g.

Connect the cooling fan motor connector and rotate the lever to lock it.

NOTICE:
·

When connecting the cooling fan motor connector, make sure that the connecting parts of the cooling fan motor connector are free of dirt, water or other foreign matter.

·

Be sure to securely connect the cooling fan motor connector.




h.

Engage the wire harness clamp.


i.

Connect the cooling fan motor connector.


j.

Engage the 4 clamps to connect the wire harness to the fan with motor assembly.


Hide G9227A 4.INSTALL NO. 3 INVERTER COOLING HOSE

a.

Connect the No. 3 inverter cooling hose to the radiator assembly and slide the clip to secure it.


b.

Engage the clamp to connect the No. 3 inverter cooling hose to the fan with motor assembly.


Hide 16572D 5.CONNECT NO. 2 RADIATOR HOSE

a.

Connect the No. 2 radiator hose to the radiator assembly and slide the clip to secure it.


b.

Engage the clamp to connect the No. 2 radiator hose to the fan with motor assembly.


Hide G9226A 6.CONNECT NO. 2 INVERTER COOLING HOSE

a.

Engage the clamp and connect the No. 2 inverter cooling hose to the fan with motor assembly.


Hide G9229A 7.CONNECT NO. 5 INVERTER COOLING HOSE

a.

Engage the 2 clamps and connect the No. 5 inverter cooling hose to the fan with motor assembly.


Hide G9228A 8.CONNECT NO. 4 INVERTER COOLING HOSE

a.

Connect the No. 4 inverter cooling hose to the radiator assembly and slide the clip to secure it.


Hide 16571C 9.CONNECT NO. 1 RADIATOR HOSE

a.

Connect the No. 1 radiator hose to the radiator assembly and slide the clip to secure it.


b.

Engage the clamp to connect the No. 1 radiator hose to the fan with motor assembly.


Hide 16283D 10.CONNECT NO. 6 WATER BY-PASS HOSE

a.

Connect the No. 6 water by-pass hose to the radiator assembly.


Hide 16281F 11.CONNECT NO. 5 WATER BY-PASS HOSE

a.

Connect the No. 5 water by-pass hose to the radiator assembly and slide the clip to secure it.


Hide 53205 12.INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

a.

Install the upper radiator support sub-assembly with the 4 bolts.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)


b.

Engage the clamp to connect the hood lock control cable assembly to the upper radiator support sub-assembly.


Hide 16593B 13.INSTALL NO. 1 RADIATOR AIR GUIDE RH

a.

Engage the guide and claw.


b.

Install the No. 1 radiator air guide RH with the clip.


Hide 16595B 14.INSTALL NO. 1 RADIATOR AIR GUIDE LH

a.

Engage the guide and claw.


b.

Install the No. 1 radiator air guide LH with the clip.


Hide 53253B 15.INSTALL UPPER RADIATOR MOUNTING BRACKET

a.

Install the 2 upper radiator mounting brackets with the 2 bolts and 2 nuts.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)


b.

Connect the 2 horn connectors.


Hide 17750A 16.INSTALL INLET AIR CLEANER ASSEMBLY

Hide 53019F 18.INSTALL RADIATOR SHUTTER SUB-ASSEMBLY

Hide 52131A 19.INSTALL FRONT BUMPER REINFORCEMENT

Hide 52611 20.INSTALL FRONT BUMPER ENERGY ABSORBER

Hide G9040 22.INSTALL INVERTER WATER PUMP ASSEMBLY

Hide 23.ADD ENGINE COOLANT (for Engine)

Hide 24.INSPECT FOR COOLANT LEAK (for Engine)

Hide 25.INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY (w/ Cover)

Hide 51441 26.INSTALL NO. 1 ENGINE UNDER COVER

Hide 53852K 27.INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

Hide 53851M 28.INSTALL FRONT WHEEL OPENING EXTENSION PAD RH