89111
1.INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (for LHD)
Engage the 2 claws to install the central gateway ECU (network gateway ECU).
Make sure that the central gateway ECU (network gateway ECU) is securely installed.
82877
2.INSTALL ECU INTEGRATION BOX RH (for LHD)
Install the ECU integration box RH with the bolt and nut.
Engage the 2 clamps.
Connect each connector.
55303B
3.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for LHD, w/o Passenger Side Knee Airbag)
55303B
4.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for LHD, w/ Passenger Side Knee Airbag)
73990
5.INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (for LHD, w/ Passenger Side Knee Airbag)
55607
6.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)
55317A
7.INSTALL INSTRUMENT SIDE PANEL RH (for LHD)
62311B
8.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for LHD)
Use the same procedure as for the LH side.
Click hereVehicle Exterior>DOOR / HATCH>FRONT DOOR OPENING TRIM WEATHERSTRIP>INSTALLATION
62111A
9.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (for LHD)
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
67913
10.INSTALL FRONT DOOR SCUFF PLATE RH (for LHD)
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
55476C
11.INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH (for LHD)
55012A
12.INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for LHD)
55435B
13.INSTALL NO. 1 METER HOOD CLUSTER (for LHD)
14.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (for LHD)
64718C
15.INSTALL LUGGAGE TRIM SERVICE HOLE COVER (for LHD)
89111
16.INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (for RHD)
Engage the 2 claws to install the central gateway ECU (network gateway ECU).
Make sure that the central gateway ECU (network gateway ECU) is securely installed.
82877
17.INSTALL ECU INTEGRATION BOX RH (for RHD)
Install the ECU integration box RH with the bolt and 2 nuts.
Engage the clamp.
Connect each connector.
55308B
18.INSTALL NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY (for RHD)
Use the same procedure as for LHD.
Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>INSTALLATION
73900
19.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for RHD)
Use the same procedure as for LHD.
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>KNEE AIRBAG ASSEMBLY (for Driver Side)>INSTALLATION