89890A
1.INSTALL BATTERY ECU ASSEMBLY
Be sure to wear insulated gloves and protective goggles.
Install the battery ECU assembly to the HV battery with the 3 nuts.
| *a | Black Label |
Check color of the label.
If the battery ECU assembly has been struck or dropped, replace it.
Connect the 3 battery ECU assembly connectors and move the lock lever to lock them.
Make sure that the connectors are connected securely.
Engage the clamp.
G929A
2.INSTALL NO. 1 HV BATTERY HOSE
Be sure to wear insulated gloves and protective goggles.
Engage the 2 claws to install the No. 1 HV battery hose to the HV battery.
Engage the 2 clips.
G920NB
3.INSTALL UPPER HV BATTERY COVER SUB-ASSEMBLY
Be sure to wear insulated gloves and protective goggles.
Install the upper HV battery cover sub-assembly to the HV battery with the 5 bolts and 7 nuts.
82161
4.CONNECT FLOOR WIRE
G92PF
5.INSTALL NO. 4 HV BATTERY PROTECTOR
82161
6.CONNECT FLOOR WIRE
G9290A
7.INSTALL HYBRID BATTERY HOSE ASSEMBLY
G92N4A
8.INSTALL NO. 1 HV BATTERY COVER PANEL RH
71033
9.INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY
76971G
10.INSTALL REAR UNDER COVER
76974F
11.INSTALL REAR UNDER SIDE COVER LH
67918A
12.INSTALL REAR DOOR SCUFF PLATE LH
76973F
13.INSTALL REAR UNDER SIDE COVER RH
67917A
14.INSTALL REAR DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
899A0A
15.INSTALL NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY
G3834
16.INSTALL SERVICE PLUG GRIP
17.PERFORM INITIALIZATION