Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › BATTERY PLUG (for LITHIUM-ION BATTERY) › from 2020.08
RM33C0E _51 Engine / Hybrid System _065433 HYBRID / BATTERY CONTROL _0442446 BATTERY PLUG(for LITHIUM-ION BATTERY) A

HYBRID / BATTERY CONTROL  BATTERY PLUG(for LITHIUM-ION BATTERY)  INSTALLATION  


PROCEDURE

Hide G3830A 1.INSTALL ELECTRIC VEHICLE BATTERY PLUG ASSEMBLY

CAUTION:

Be sure to wear insulated gloves and protective goggles.


a.

Install the electric vehicle battery plug assembly to the HV battery with the bolt.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


b.

Connect the hybrid battery terminal block connector.

NOTICE:

Make sure that the connector is connected securely.



c.

Connect the HV battery junction block assembly connector.

NOTICE:

Make sure that the connector is connected securely.



d.

Engage the 2 claws to close the wiring harness protector.


e.

Connect the electric vehicle battery plug assembly connector.


Hide 71033 3.INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY

Hide 76974F 5.INSTALL REAR UNDER SIDE COVER LH

Hide 67918A 6.INSTALL REAR DOOR SCUFF PLATE LH

Hide 76973F 7.INSTALL REAR UNDER SIDE COVER RH

Hide 67917A 8.INSTALL REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure as for the LH side.


Hide 72693 9.INSTALL REAR SEAT CUSHION LOCK HOOK

Hide 10.INSTALL REAR SEAT CUSHION ASSEMBLY

Hide 73350C 11.CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY