16100
1.INSTALL WATER PUMP
11385
2.INSTALL CAMSHAFT OIL SEAL RETAINER
13523P
3.INSTALL NO.1 CAMSHAFT TIMING PULLEY
4.INSTALL IDLER PULLEY
13568
5.INSTALL TIMING BELT
6.INSTALL WATER PUMP PULLEY, FLUID COUPLING, FAN AND DRIVE BELTS
Perform phase assembly in order to improve reliability.
Install the fan to the fluid coupling with 4 new nuts.
6.4 N*m (65 kgf*cm, 57 in.*lbf)
Assemble the same paint color section of the installing section of the water pump pulley seat and the fan coupling.
Temporarily install the pump pulley, the fan with fluid coupling with the 4 nuts.
Install and adjust the drive belt.
Click hereEngine / Hybrid System>1HZ (ENGINE MECHANICAL)>ENGINE TUNE-UP>ALTERNATOR DRIVE BELT INSPECTION
Tighten the 4 water pump pulley nuts.
20 N*m (200 kgf*cm, 14 ft*lbf)
7.FILL WITH ENGINE COOLANT
8.START ENGINE AND CHECK FOR COOLANT LEAKS