Home › Vehicle Interior › AIR CONDITIONING › AIR CONDITIONING PANEL › 2017.01–2019.08
RM2850E _58 Vehicle Interior _073207 AIR CONDITIONING _0356289 AIR CONDITIONING PANEL A

AIR CONDITIONING  AIR CONDITIONING PANEL  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for LHD and RHD vehicles.

·

The procedure listed below is for RHD vehicles.

·

A bolt without a torque specification is shown in thestandard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS



PROCEDURE

Hide 55900 1.INSTALL AIR CONDITIONING CONTROL ASSEMBLY

a.
E361547E01
1.188,0.802 1.188,0.25 1.188,0.25 1.313,0.25 true 2.427,0.542 2.938,0.542 true 1.99,1.542 1.99,1.823 true 1.76,1.021 1.76,1.229 true 1.375,0.177 1.688,0.375 0.313,0.198 10 false *a 3,0.469 3.313,0.667 0.313,0.198 10 false *b 1.667,1.219 1.979,1.417 0.313,0.198 10 false *c 1.917,1.844 2.229,2.042 0.313,0.198 10 false *d

Set the defroster damper control lever in "DEF mode".


b.

Set the air inlet damper control lever in "RECIRC mode".


c.

Set the air mix damper control lever in "COOL mode".


d.

Set the water valve control lever in "COOL mode".

Text in Illustration
*a Defroster Damper Control Lever
*b Air Inlet Damper Control Lever
*c Air Mix Damper Control Lever
*d Water Valve Control Lever


e.

Connect the connectors.


f.

Set the air conditioner control assembly on the vehicle.


g.
E361557E01
0.74,0.365 0.74,0.135 0.74,0.135 0.906,0.135 false 1.646,0.542 1.865,0.542 false 1.385,1.583 1.385,0.698 true 0.969,0.073 1.281,0.271 0.313,0.198 10 false *1 1.313,1.583 1.625,1.781 0.313,0.198 10 false *a 1.917,0.49 2.229,0.688 0.313,0.198 10 false *b 2.094,0.031 2.406,0.229 0.313,0.198 10 false *c 3.177,0.552 3.396,0.781 0.219,0.229 10 false *d

Connect the air inlet damper control cable sub-assembly:

i.

Connect the end of the air inlet damper control cable sub-assembly inner cable to the control lever.


ii.

Secure the air mix damper control cable sub-assembly by aligning the marking with the clamp.

NOTICE:

Operate the air inlet damper control lever and check that there is a sense of moderation on both ends of FRESH - RECIRC and that there is no return.


Text in Illustration
*1 Air Inlet Damper Control Cable Sub-assembly
*a Marking Part
*b Clamp Part
*c FRESH
*d RECIRC


iii.
E361558E01
1.854,0.917 1.979,0.635 1.979,0.635 2.177,0.635 false 2.24,0.583 2.552,0.781 0.313,0.198 10 false *1

Connect the air inlet damper control cable sub-assembly, pull the outer cable of the air inlet damper control cable sub-assembly in the direction of the arrow shown in the illustration and secure it with the clamp.

NOTICE:

Operate the air inlet damper control lever and check that there is a sense of moderation on both ends of FRESH - RECIRC and that there is no return.


Text in Illustration
*1 Air Inlet Damper Control Cable Sub-assembly
V100135

Clamp Part
V100136

Pulling Direction



h.
E361559E01
1.365,1.042 1.677,1.042 true 1.948,1.042 2.417,1.042 true 1.604,0.188 1.833,0.188 false 1.906,0.135 2.219,0.333 0.313,0.198 10 false *1 1.156,0.958 1.469,1.156 0.313,0.198 10 false *a 2.448,0.948 2.615,1.146 0.167,0.198 10 true *b 1.073,1.292 1.26,1.458 0.188,0.167 10 true *c 1.073,1.979 1.333,2.135 0.26,0.156 10 false *d

Connect the water valve control cable sub-assembly:

i.

Connect the end of the water valve control cable sub-assembly inner cable to the control lever.


ii.

Secure the water valve control cable sub-assembly by aligning the marking with the clamp.

NOTICE:

Operate the water valve control lever and check that there is a sense of moderation on both ends of MAX COOL - MAX HOT and that there is no return.


Text in Illustration
*1 Water Valve Control Cable Sub-assembly
*a Marking Part
*b Clamp Part
*c MAX HOT
*d MAX COOL


iii.
E361560E01
1.948,0.365 2.5,0.365 false 1.75,0.302 2.063,0.5 0.313,0.198 10 false *1 0.438,1.688 0.75,1.885 0.313,0.198 10 false *a 2.073,1.969 2.385,2.167 0.313,0.198 10 false *b

Set the water valve lever in the closed position, connect the water valve control cable sub-assembly, pull the outer cable of the water valve control cable sub-assembly in the direction of the arrow shown in the illustration and secure it with the clamp.

NOTICE:

Operate the water valve control lever and check that there is a sense of moderation on both ends of MAX COOL - MAX HOT and that there is no return.


Text in Illustration
*1 Water Valve Control Cable Sub-assembly
*a Opened Position
*b Closed Position
V100135

Clamp Part
V100136

Pulling Direction



i.
E361555E01
1.677,1.156 2.271,1.156 true 2.333,1.073 2.646,1.271 0.313,0.198 10 false *1

Connect the defroster damper control cable sub-assembly:

i.

Connect the defroster damper control cable sub-assembly, pull the outer cable of the defroster damper control cable sub-assembly in the direction of the arrow shown in the illustration and secure it with the clamp.

NOTICE:

Operate the defroster damper control lever and check that there is a sense of moderation on both ends of FACE - DEF and that there is no return.


Text in Illustration
*1 Defroster Damper Control Cable Sub-assembly
V100135

Clamp Part
V100136

Pulling Direction



j.
E361556E01
1.542,1.021 1.542,1.198 1.542,1.198 2.229,1.198 true 2.292,1.125 2.604,1.323 0.313,0.198 10 false *1

Connect the air mix damper control cable sub-assembly:

i.

Connect the air mix damper control cable sub-assembly, pull the outer cable of the air mix damper control cable sub-assembly in the direction of the arrow shown in the illustration and secure it with the clamp.

NOTICE:

Operate the air mix damper control lever and check that there is a sense of moderation on both ends of MAX COOL - MAX HOT and that there is no return.


Text in Illustration
*1 Air Mix Damper Control Cable Sub-assembly
V100135

Clamp Part
V100136

Pulling Direction



k.

Install the air conditioner control assembly with the 4 bolts.


Hide 55601C 2.INSTALL INSTRUMENT PANEL UNDER TRAY SUB-ASSEMBLY

Hide 55470 3.INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

Hide 55412D 4.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL

Hide 86250 5.INSTALL AMPLIFIER MICROPHONE ASSEMBLY (w/ Microphone)

Hide 55433B 6.INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

Hide 58123A 7.INSTALL SHIFT AND SELECT LEVER SUPPORT (for Manual Transmission)

Hide 58286 8.INSTALL NO. 1 SHIFT AND SELECT LEVER BOOT (for Manual Transmission)

Hide 58534A 9.INSTALL TRANSMISSION COVER MAT (for Manual Transmission)

Hide 33504F 10.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

Hide 58841A 11.INSTALL SHIFTING HOLE COVER (for Automatic Transmission)

Hide 55410C 12.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY