Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for RHD vehicles.
84233
1.INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the "TORX" bolt.
4.2 N*m (43 kgf*cm, 37 in.*lbf)
Connect the connector.
62413A
2.INSTALL LOWER CENTER PILLAR GARNISH RH
73233
3.INSTALL LAP BELT OUTER ANCHOR COVER
46243
4.INSTALL PARKING BRAKE LEVER COVER
5.INSTALL FRONT SEAT ASSEMBLY RH
6.INSTALL CENTER DOOR REMOTE CONTROL ROD ASSEMBLY (for Manual Type Center Door)