Use the same procedure for RHD and LHD vehicles.
The procedure listed below are for RHD vehicles.
1.REMOVE FRONT HEATER UNIT
55106D
2.REMOVE PEDAL BRACKET SUB-ASSEMBLY
for LHD with Brake pedal Load Sensing Switch:
Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE BOOSTER (for LHD with Brake pedal Load Sensing Switch)>REMOVAL
for RHD with Brake pedal Load Sensing Switch:
Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE BOOSTER (for RHD with Brake pedal Load Sensing Switch)>REMOVAL
85292B
3.REMOVE FRONT WIPER ARM HEAD CAP
Using a screwdriver, detach the 3 claws and remove the front wiper arm head cap.
| *a | Protective Tape |
Tape the screwdriver tip before use.
Use the same procedure for the RH side and LH side.
4.REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH
Remove the nut and windshield wiper arm and blade assembly RH.
5.REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH
Remove the nut and windshield wiper arm and blade assembly LH.
85169
6.REMOVE NO. 1 WINDSHIELD WIPER LINK PIVOT WASHER
Using a 34 mm socket wrench, remove the front wiper nut.
Remove the No. 1 windshield wiper link pivot washer.
Use the same procedure for the RH side and LH side.
85150B
7.REMOVE WIPER LINK ASSEMBLY
Using a screwdriver with its tip wrapped with protective tape, disconnect the crank arm pivot.
| *a | Protective Tape |
Be careful not to damage the wiper link assembly and vehicle body.
Remove the 8 bolts and wiper link assembly.
Do not drop the wiper rod.
85070
8.REMOVE FRONT WIPER MOTOR AND BRACKET ASSEMBLY
Disconnect the connector and detach the clamp.
Remove the 2 bolts (A).
loosen the 2 bolts (B) and remove the front wiper motor and bracket assembly.
|
Bolt |
|
Connector |