Home › Vehicle Interior › WIPER / WASHER › WASHER MOTOR (for Rear Side)
RM2850E _58 Vehicle Interior _073209 WIPER / WASHER _0356348 WASHER MOTOR(for Rear Side) A

WIPER / WASHER  WASHER MOTOR(for Rear Side)  INSTALLATION  


PROCEDURE

Hide 85332D 1.INSTALL REAR WASHER TANK CAP

a.

Insert the guide and install the rear washer tank cap.


Hide 85310R 2.INSTALL REAR WASHER MOTOR ASSEMBLY

a.
B463259E01
2.469,2.219 2.896,1.906 true 2.927,1.792 3.24,1.99 0.313,0.198 10 false *a

Install a new grommet.


b.

Install the rear washer motor assembly.

Text in Illustration
*a Grommet

NOTICE:

Make sure the rear washer motor assembly is securely inserted to prevent water leaks.



Hide 85330R 3.INSTALL REAR WASHER JAR ASSEMBLY

a.
B463178E01
2.885,0.531 3.25,0.74 0.365,0.208 10 false (1) 0.51,0.76 0.875,0.969 0.365,0.208 10 false (3) 2.854,1.865 3.219,2.073 0.365,0.208 10 true (2)

Install the rear washer jar with the 3 bolts in the order shown in the illustration.

Torque:

5.5 N*m (56 kgf*cm, 49 in.*lbf)



b.

Insert the washer hose into the guide.


c.

Connect the washer hose to the rear washer motor assembly.


d.

Connect the connector.

Text in Illustration
V100135

Bolt
V100136

Connector


Hide 4.FILL UP WINDSHIELD WASHER FLUID

a.

Fill up the rear washer jar assembly with windshield washer fluid.


Hide 62512R 5.INSTALL REAR BODY INSIDE TRIM REAR LH

Hide 58614A 6.INSTALL NO.4 MAT SET PLATE

Hide 62472D 7.INSTALL REAR PILLAR GARNISH UPPER LH

Hide 64735A 8.INSTALL CENTER BACK RAIL INNER GARNISH