47121
1.INSTALL BRAKE PEDAL PAD
Install the brake pedal pad to the brake pedal sub-assembly.
47131
2.INSTALL STOP LAMP SWITCH CUSHION
Install the stop light switch cushion to the brake pedal sub-assembly.
47124A
3.INSTALL BRAKE PEDAL SHAFT COLLAR
Apply lithium soap base glycol grease to the 2 new brake pedal bushes and the brake pedal shaft collar.
| *1 | Lithium Soap Base Glycol Grease |
Install the 2 brake pedal bushes and brake pedal shaft collar to the brake pedal sub-assembly.
47101A
4.INSTALL BRAKE PEDAL RETURN SPRING
Apply lithium soap base glycol grease to the brake pedal return spring and the brake pedal.
Install the brake pedal return spring to the brake pedal sub-assembly.
47101
5.INSTALL BRAKE PEDAL SUB-ASSEMBLY
Install the brake pedal sub-assembly to the pedal bracket assembly with the bolt and nut.
30 N*m (306 kgf*cm, 22 ft.*lbf)
Connect the brake pedal sub-assembly with the bolt.
Connect the connector.
47264A
6.INSTALL PUSH ROD PIN
Apply lithium soap base glycol grease to the push rod pin.
| *1 | Lithium Soap Base Glycol Grease |
Install the push rod pin with a new clip.
84340
7.INSTALL STOP LIGHT SWITCH
8.INSPECT AND ADJUST BRAKE PEDAL HEIGHT
9.INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
10.INSTALL STEERING COLUMN ASSEMBLY