Home › Engine / Hybrid System › 2TR-FE (ENGINE CONTROL) › SFI SYSTEM
RM2850E _51 Engine / Hybrid System _073287 2TR-FE ENGINE CONTROL _0357042 SFI SYSTEM Y

2TR-FE ENGINE CONTROL  SFI SYSTEM  BASIC INSPECTION  


CAUTION / NOTICE / HINT

When a malfunction is not confirmed in the DTC check, perform troubleshooting on all circuits considered possible causes of the problem. In many cases, by carrying out the basic engine check shown in the following flowchart, the location of the problem can be found quickly and efficiently. This check is essential when troubleshooting the engine.

PROCEDURE

1.CHECK BATTERY VOLTAGE
NOTICE:

Perform the battery check with the engine stopped and ignition switch OFF.


Result:
Result Proceed to
11 V or more OK
Below 11 V NG



OK

2.CHECK IF ENGINE CRANKS

NG

CHARGE OR REPLACE BATTERY

2.CHECK IF ENGINE CRANKS
Result:
Proceed to
OK
NG



OK

3.CHECK IF ENGINE STARTS

NG

PROCEED TO PROBLEM SYMPTOMS TABLE

3.CHECK IF ENGINE STARTS
Result:
Proceed to
OK
NG



OK

4.CHECK AIR FILTER

NG

6.CHECK FUEL PRESSURE
4.CHECK AIR FILTER
a.

Perform a visual check and make sure that the air filter is not contaminated with dirt or oil.


Result:
Proceed to
OK
NG



OK

5.CHECK IDLING SPEED

NG

REPLACE AIR FILTER

5.CHECK IDLING SPEED

Result:
Proceed to
OK
NG



OK

PROCEED TO PROBLEM SYMPTOMS TABLE

NG

TROUBLESHOOT ENGINE MECHANICAL

6.CHECK FUEL PRESSURE

Result:
Proceed to
OK
NG



OK

7.CHECK FOR SPARK

NG

TROUBLESHOOT FUEL SYSTEM AND PROCEED TO NEXT STEP

7.CHECK FOR SPARK

Result:
Proceed to
OK
NG



OK

PROCEED TO TROUBLESHOOTING

NG

TROUBLESHOOT IGNITION SYSTEM AND PROCEED TO NEXT STEP